Audi RS6 2015-2018 front bumper lower splitter Lip black FRP

Enhance even more the front end of your Audi RS6 style front bumper conversion 2015-2018 with our sleek and sporty black FRP lip.

ITEM DESCRIPTION:

• We designed and manufactured our front splitter/lip in-house from high-grade FRP (fiber-reinforced plastic), making it very durable and strong.
• Please be aware that the finish on our splitter/lip is not gloss black paint. While we do our best to deliver the best finish possible, FRP parts may have minor surface imperfections and will often require preparation and painting before installation.
• If you’re happy with the finish, you can install the splitter/lip as it is — otherwise, painting is recommended for a more refined look.
• Front bumper skin not included.

INSTALLATION:

1. Prepare Your Workspace: Park your RS6 on a flat, well-lit surface and ensure you have all the necessary tools and materials, including the splitter lip, screws, and a screwdriver.

2. Access the Bumper: Lift the front of your RS6 using a jack and secure it with jack stands. This will provide better access to the front bumper.

3. Position the Lip: Align the splitter lip with the front bumper, ensuring it sits flush and lines up perfectly with the bumper’s edges.

4. Mark Screw Locations: Using a pencil or a marker, mark the locations where you will be screwing the lip into the bumper. Make sure these marks are evenly spaced along the lip.

5. Pre-Drill Holes: Carefully pre-drill holes at the marked locations. Be sure to use a drill bit that’s slightly smaller in diameter than the screws you’ll be using.

6. Attach the Lip: Line up the pre-drilled holes on the lip with the holes on the bumper. Secure the lip in place by screwing it onto the bumper. Start with one screw to hold it in position and then add the remaining screws.

7. Tighten Securely: Ensure that all screws are tightened securely, but be cautious not to overtighten, as it may damage the lip or the bumper.

8. Check Alignment: Double-check the alignment of the lip to make sure it’s perfectly centered and flush with the bumper.

9. Test for Stability: Gently shake the splitter lip to confirm it’s firmly attached to the bumper.

10. Lower Your Vehicle: Carefully remove the jack stands and lower your RS6 to the ground.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

Please Note: This item is custom-made specifically to order (“made to order”). Due to its unique nature, special items are excluded from our return and refund policy (“Non-refundable”).

FITMENT:

• X-UK 2015-2018 facelift RS6 style front bumper conversion.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.