Audi RS6 2011-2018 front lower splitter lip gloss black with canards

Enhance your Audi RS6 2011-2018’s front end with our sleek and stylish gloss black front lower splitter lip, complemented by included canards for an even sportier look.

ITEM DESCRIPTION:

• Our Audi RS6 2011-2018 front lower splitter lip gloss black with canards has been designed and manufactured in-house from ABS plastic.
• It comes with an x4 canard set.
• Finished in gloss black.
• It comes with a set of screws.

INSTALLATION:

1. Preparation:
– Ensure your vehicle is parked on a flat and stable surface.
– If desired, use masking tape to mark the installation points for precise positioning.

2. Install the splitter lip:
– Apply a generous amount of automotive silicone adhesive along the edges and contact points of the front lower splitter lip.
– Carefully position the lip onto the front bumper, ensuring it lines up correctly with your masking tape markings if you used them.
– Secure the lip in place by inserting screws through the holes in the lip and into the bumper. Tighten them securely but avoid over-tightening, as this could damage the lip or bumper.

3. Install the canards:
– Apply automotive silicone adhesive alongside double sided tape to the back of the canards.
– Position the canards on the desired locations along the front bumper, ensuring they align properly with the splitter lip and the bumper’s design.

6. Final adjustments:
– Double-check the alignment of the splitter lip and canards to ensure they are symmetrical and properly positioned.
– Wipe away any excess silicone adhesive that may have squeezed out during installation.

7. Allow for curing time:
– Let the automotive silicone adhesive cure for the recommended time as specified by the product’s instructions. This typically takes several hours or overnight.

8. Test drive:
– Before hitting the road, take your vehicle for a test drive to ensure that the splitter lip and canards remain secure and do not interfere with any other components.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

FITMENT:

• X-UK 2011-2018 RS6 style front bumper conversion.
• OEM RS6 front bumper 2011-2018.
• Please be aware that to install our front splitter, the lower lip needs to be removed.
• A fitting service is available with this item! Please email us at xenonzuk@gmail.com for further information.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.