Audi RS3 2009-2012 8P black FRP front splitter lip extension

Transform the front end of your Audi RS3 8P 2009-2012 with our striking black FRP front splitter lip extension.

ITEM DESCRIPTION:

• We have designed and manufactured our front splitter lip for the Audi RS3 8P 2009-2012 from high-grade FRP (fiber reinforced plastic), ensuring its durability and strength.
• Please be aware that the finish on our splitter/lip is not gloss black paint. While we do our best to deliver the best finish possible, FRP parts may have minor surface imperfections and will often require preparation and painting before installation.
• If you’re happy with the finish, you can install the splitter/lip as it is — otherwise, painting is recommended for a more refined look.
• Front bumper skin NOT included.
• Length​: ​179 cm / 70.50 inch.
• ​Width: 56 cm / 22 inch.​​​

INSTALLATION:

1. Preparation:
– Ensure your Audi RS3 is parked on a flat and stable surface. If needed, use a jack and jack stands to elevate the front of the vehicle for better access.
– Clean the lower front bumper area where the splitter will be attached using alcohol and a microfiber cloth. This ensures a clean and grease-free surface.

2. Positioning:
– Temporarily place the black FRP front splitter lip extension in its desired position on the lower front bumper. Use masking tape to hold it in place.
– Measure and align the splitter to ensure it is centered and level.

3. Application of Silicone:
– Lift the splitter and apply a generous amount of automotive-grade silicone adhesive along the edges and contact points that will be in contact with the bumper.
– Lower the splitter back into position, pressing it firmly against the bumper to spread the adhesive evenly.

4. Securing with Screws:
– After applying silicone, insert screws through the pre-drilled holes in the splitter and into the corresponding points on the bumper.
– Tighten the screws securely but avoid over-tightening to prevent damage to the splitter or the bumper.
– Wipe away any excess silicone that may have squeezed out during installation.

5. Final Adjustments:
– Double-check the alignment and level of the splitter to ensure it meets your desired appearance.
– Allow the silicone to cure as per the manufacturer’s instructions, typically for at least 24 hours.
– Remove any masking tape or protective film from the splitter.

6. Test Drive:
– Before driving, test the splitter’s stability by gently pushing on it to ensure it’s securely attached.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

Please Note: This item is custom-made specifically to order (“made to order”). Due to its unique nature, special items are excluded from our return and refund policy (“Non-refundable”).

FITMENT:

• X-UK RS3 2009-2012 (8P) style front bumper conversion.
• Audi OEM RS3 (8P) 2009-2012 front bumper.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.