RS7 style rear diffuser for Audi A7 S-line S7 RS7 2011-2014 black FRP finish

Transform your Audi A7 (2011-2014) with our RS7-style rear diffuser for a sleek, aggressive look. Black FRP finish included.

ITEM DESCRIPTION:

• We manufacture our X-UK RS7 style rear diffuser in-house using high-grade FRP (fiber re-enforced plastic).
• Our rear diffuser does not come with exhaust tailpipe relocators.
• Please be aware that the finish on our rear diffuser is not gloss black paint. While we do our best to deliver the best finish possible, FRP parts may have minor surface imperfections and will often require preparation and painting before installation.
• If you’re happy with the finish, you can install the diffuser as it is — otherwise, painting is recommended for a more refined look.

INSTALLATION:

• Please be aware that the OEM exhaust will need modifications.
• Vehicles with a Bi-TDi exhaust setup will need a different modification due to the size of the exhaust pipes.
• Professional installation is highly recommended.

FITMENT:

• A7 2011-2014 S-line rear bumper.
• S7 2011-2014 rear bumper.
• RS7 2011-2014 rear bumper.
• Does not fit the SE rear bumper.

Please Note: This item is custom-made specifically to order (“made to order”). Due to its unique nature, special items are excluded from our return and refund policy (“Non-refundable”).

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.

IMPORTANT INFORMATION:

Customers with a BI-TDI Engine.

• The facelift Bi-TDI has two square tailpipes behind the diffuser. Once the original diffuser is removed, you can see these two pipes, one on each side. Once you have installed our diffuser, please make sure that the location of these original tailpipes that sit behind the diffuser is not located to release hot exhaust gases through the central part of the oval FRP tips that is part of the diffuser.
• These pipes need to be relocated by an exhaust fabricator so that the hot exhaust gases do not melt the plastic diffuser.
• So in order to install our RS7 style diffuser to your A7/S7 facelift, you will need to have some exhaust work carried out.
• We have had customers in the past that have not taken our advice into consideration and have melted the new plastic diffuser because they did not have the exhaust pipes relocated.
• Customers with an S7 4.0 v8 TFSI Engine.
• To install our RS7 diffuser onto an S7 you will need to remove/disconnect both back boxes/mufflers on both sides and remove them, then you will need to have an exhaust fabricator to make a new pipe on both the left and right and make it relocate towards the center of the oval tailpipe that is part of the RS7 diffuser conversion.
• The exhaust will become a lot deeper by doing this modification, however, this will not make the car much louder.