Audi Q8 4M 2019-2022 front bumper gloss black lower splitter lip

We precision-craft our Front Splitter Lip for the Audi Q8 4M 2019-2022 from premium ABS plastic, featuring an elegant glossy black finish.

INSTALLATION:

1. Prepare Your Vehicle: Park your Audi Q8 4M 2019-2022 on a level surface and ensure the engine is turned off. This provides a safe and stable environment for installation.

2. Clean the Surface: Thoroughly clean the lower front bumper area where the splitter lip will be attached. Remove any dirt, debris, or residue, ensuring a clean surface for attachment.

3. Position the Splitter Lip: Carefully position the Front Bumper Gloss Black Lower Splitter Lip, ensuring it aligns properly with the lower bumper. Take your time to achieve the desired fit.

4. Mark the Attachment Points: Use a washable marker or masking tape to mark the areas where the splitter lip will be attached. These marks will guide the placement of screws and silicone adhesive.

5. Pre-Drill Holes: Drill small pilot holes at the marked attachment points. This will make it easier to secure the lip with screws.

6. Apply Silicone Adhesive: Apply silicone adhesive to the contact surfaces of the splitter lip that will be attached to the lower bumper. Follow the adhesive manufacturer’s instructions for proper application.

7. Attach with Screws: Align the splitter lip with the pre-drilled holes and apply screws through the holes into the bumper. Start with a few screws to ensure proper alignment, then tighten them all securely.

8. Final Adjustments: Double-check the alignment and make any necessary adjustments to ensure a snug fit. Wipe away any excess adhesive that may have squeezed out during installation.

9. Clean and Inspect: Clean any fingerprints or marks from the splitter lip and your vehicle’s surface. Inspect the installation to ensure everything is secure.

10. Allow Adhesive to Cure: Follow the adhesive manufacturer’s recommended curing time to allow the silicone to bond effectively.

11. Enjoy the Upgrade: Step back and admire your Audi Q8’s enhanced appearance. You’ve successfully installed our Front Bumper Gloss Black Lower Splitter Lip, adding both style and aerodynamic functionality to your vehicle.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

FITMENT:

• Audi Q8 4M 2019-2022.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.

​