Audi RS3 2009-2012 8P black FRP front splitter lip extension

Transform the front end of your Audi RS3 8P 2009-2012 with our striking black FRP front splitter lip extension.

ITEM DESCRIPTION:

• We have designed and manufactured our front splitter lip for the Audi RS3 8P 2009-2012 from high-grade FRP (fiber reinforced plastic), ensuring its durability and strength.
• Please be aware that the finish on our front splitter/lip is not gloss black paint, however, if you are happy with the finish you can install it, otherwise, you can paint it.
• Front bumper skin NOT included.

ITEM DESCRIPTION:

• Length​: ​179 cm / 70.50 inch.
• ​Width: 56 cm / 22 inch.​​​

INSTALLATION:

1. Preparation:
– Ensure your Audi RS3 is parked on a flat and stable surface. If needed, use a jack and jack stands to elevate the front of the vehicle for better access.
– Clean the lower front bumper area where the splitter will be attached using alcohol and a microfiber cloth. This ensures a clean and grease-free surface.

2. Positioning:
– Temporarily place the black FRP front splitter lip extension in its desired position on the lower front bumper. Use masking tape to hold it in place.
– Measure and align the splitter to ensure it is centered and level.

3. Application of Silicone:
– Lift the splitter and apply a generous amount of automotive-grade silicone adhesive along the edges and contact points that will be in contact with the bumper.
– Lower the splitter back into position, pressing it firmly against the bumper to spread the adhesive evenly.

4. Securing with Screws:
– After applying silicone, insert screws through the pre-drilled holes in the splitter and into the corresponding points on the bumper.
– Tighten the screws securely but avoid over-tightening to prevent damage to the splitter or the bumper.
– Wipe away any excess silicone that may have squeezed out during installation.

5. Final Adjustments:
– Double-check the alignment and level of the splitter to ensure it meets your desired appearance.
– Allow the silicone to cure as per the manufacturer’s instructions, typically for at least 24 hours.
– Remove any masking tape or protective film from the splitter.

6. Test Drive:
– Before driving, test the splitter’s stability by gently pushing on it to ensure it’s securely attached.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

FITMENT:

• X-UK RS3 2009-2012 (8P) style front bumper conversion.
• Audi OEM RS3 (8P) 2009-2012 front bumper.
• A fitting service is available with this item! Please email us at xenonzuk@gmail.com for further information.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.