Audi RS4 2008-2012 B8 front splitter lip black FRP finish

Audi RS4 lip FRP. Elevate the look of your Audi RS4 2008-2012 B8 with our black FRP front splitter lip.

ITEM DESCRIPTION:

• Our front splitter/lip is manufactured in-house from high-grade FRP (fiber reinforced plastic).
• Finished in black FRP “Please be aware that the finish on our front splitter/lip is not gloss black paint, however, if you are happy with the finish you can install it, otherwise you can paint it.
• Front bumper skin not included.

INSTALLATION:

1. Prepare the Area: Park the vehicle on a flat surface and engage the parking brake for stability.

2. Clean the Surface: Thoroughly clean the area on the front bumper where the splitter lip will be attached. Use panel wipe to remove any dirt, grease, or residue. Ensure the surface is dry before proceeding.

3. Position the Splitter Lip: Align the front splitter lip with the bottom edge of the front bumper. Ensure it fits correctly and follows the bumper’s contours.

4. Mark Attachment Points: Mark the locations on the bumper where screws will be inserted to secure the lip.

5. Apply Silicone Adhesive: Apply a continuous bead of automotive silicone adhesive along the underside of the splitter lip, especially along the edges that will be in contact with the bumper. This adhesive will provide additional support and prevent moisture from seeping in.

6. Drill Pilot Holes (if needed): Depending on the lip and bumper design, you might need to drill pilot holes for the screws. Ensure the holes are slightly smaller than the screws for a snug fit.

7. Attach the Splitter Lip: Align the marked attachment points on the lip with the bumper. Secure the lip in place by first pressing firmly to ensure the silicone adheres well to the bumper.

8. Insert Screws: If pilot holes were drilled, insert screws through the splitter lip and into the pre-drilled holes on the bumper. Tighten the screws using a screwdriver. Be careful not to overtighten to avoid damage.

9. Clean Up Excess Adhesive: Wipe away any excess silicone adhesive that might have squeezed out using a clean microfiber cloth.

10. Clean and Check: Clean the surface of the splitter lip and bumper with a microfibre cloth and check for proper alignment.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

FITMENT:

• X-UK 2008-2012 (B8) RS4 style front bumper conversion.
• OEM RS4 front bumper.
• A fitting service is available with this item! Please email us at xenonzuk@gmail.com for further information.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.