Audi RS6 C7 Avant 2011-2014 3 piece rear diffuser add on

Elevate the rear aesthetics of your Audi RS6 C7 Avant 2011-2014 with our meticulously designed 3-piece rear diffuser add-on.

ITEM DESCRIPTION:

• Our 3-piece rear diffuser add-on for the Audi RS6 Avant C7 from 2011 until 2014 is manufactured in 2 different finishes.

1. Primer (unpainted).
2. Gloss black paint finish.

INSTALLATION:

1. Prepare the Vehicle:
– Ensure the vehicle is parked on a flat, level surface and the engine is turned off.
– If available, use a jack or car lift to raise the rear of the vehicle. This will provide better access to the rear bumper and diffuser area.

2. Clean the Surfaces:
– Thoroughly clean the rear bumper and the mating surfaces of the 3-piece rear diffuser add-on using a clean, lint-free cloth and a suitable automotive cleaner.
– Remove any dirt, grease, or residue that may hinder proper adhesion.

3. Position the Diffuser Pieces:
– Carefully position each of the three diffuser pieces onto the rear bumper to ensure they align correctly. You can use masking tape to temporarily hold them in place.

4. Apply Automotive Silicone:
– Apply a generous amount of high-temperature resistant automotive silicone adhesive to the mating surfaces on both the rear bumper and the diffuser pieces. Ensure even coverage.

5. Attach the Diffuser Pieces:
– Gently press each diffuser piece onto the rear bumper, aligning them with the marked positions.
– Use masking tape or clamps to hold the pieces securely in place while the silicone cures. Follow the silicone manufacturer’s instructions for curing time.

6. Final Adjustments:
– Double-check the alignment of the diffuser pieces to make sure they are symmetrical and correctly positioned.
– Clean up any excess silicone that may have squeezed out during installation.

7. Curing Time:
– Allow the automotive silicone to fully cure as per the manufacturer’s instructions. This typically takes several hours to achieve maximum adhesion and strength.

8. Test Drive:
– After the silicone has cured, take your vehicle for a test drive to ensure the diffuser remains securely attached, especially if you’re driving at higher speeds.

9. Enjoy the Enhanced Look:
– With the 3-piece rear diffuser add-on securely installed, you can now enjoy the enhanced aesthetics and potential aerodynamic benefits it brings to your Audi RS6 C7 Avant.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

FITMENT:

• Audi RS6 C7 Avant from 2011 until 2014.
• Does not fit the C7.5 facelift model.
• A fitting service is available with this item! Please email us at xenonzuk@gmail.com for further information.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.