Audi RS6 C7 Avant 2011-2018 X-UK rear bumper add-on canards (pair)

Elevate the aerodynamic appeal of your Audi RS6 C7 Avant 2011-2018 with our meticulously crafted X-UK rear bumper add-on canards, available as a pair.

ITEM DESCRIPTION:

• Our rear bumper add-on canards for the Audi RS6 Avant C7 from 2011 until 2018 are manufactured in 2 different finishes.

1. Primer (unpainted).
2. Gloss black paint finish.

INSTALLATION:

1. Prepare the Work Area:
– Ensure your vehicle is parked on a flat, stable surface.
– Gather the necessary tools, including a screwdriver or drill, screws, and automotive silicone.

2. Remove the Rear Bumper (Optional):
– Depending on your preference and comfort level with vehicle modifications, you may choose to remove the rear bumper for easier access. Refer to your vehicle’s service manual for guidance on bumper removal.

3. Position the Canards:
– Hold the canards up to the rear bumper to determine their optimal placement. Make sure they are aligned symmetrically and evenly spaced.

4. Mark the Attachment Points:
– Use a pencil or marker to mark the points where you will attach the canards. These marks will serve as guides for drilling holes or applying adhesive.

5. Drill Holes (If Required):
– If you choose the screw installation method, drill small holes at the marked points on the bumper.

6. Apply Automotive Silicone (Alternative Method):
– If you prefer not to drill holes, apply automotive silicone to the back of the canards along the edges that will contact the bumper.

7. Secure the Canards:
– Align the canards with the holes (if drilled) or place them onto the adhesive (if using silicone).
– If you drilled holes, secure the canards using screws through the holes and into the bumper. Tighten them securely but not excessively to avoid damaging the canards or bumper.
– If you’re using silicone, press the canards firmly against the bumper and hold them in place for a few minutes to allow the adhesive to bond.

8. Clean Excess Silicone (If Used):
– Wipe away any excess silicone that may have oozed out from the edges.

9. Reattach the Bumper (If Removed):
– If you removed the rear bumper, carefully reattach it, ensuring all clips and fasteners are properly secured.

10. Final Adjustments:
– Double-check the alignment and positioning of the canards to ensure they meet your desired look.

11. Allow for Cure Time:
– If you used silicone, allow it to cure according to the manufacturer’s instructions before driving the vehicle.

12. Test Drive:
– Take your Audi RS6 C7 Avant for a test drive to ensure there are no vibrations or issues with the newly installed canards.

• We strongly recommend professional installation by experienced technicians who are well-versed in automotive upgrades.
• For any additional questions or assistance, don’t hesitate to contact our dedicated support team. We’re here to help you make the most of your automotive upgrade experience.

FITMENT:

• Audi RS6 C7 Avant from 2011 until 2018.
• A fitting service is available with this item! Please email us at xenonzuk@gmail.com for further information.

DELIVERY:

• We deliver worldwide.
• For swift delivery, please place your order before 2:00 pm, ‘UK local time,’ and we’ll dispatch it on the very same day. Alternatively, if you place orders after 2:00 pm, we will promptly process and send them out on the next working day, ensuring a seamless shopping experience for you.
• If you want an exact delivery price, please email us at xenonzuk@gmail.com with your full postal address and we will give you a quotation.